Db 10A User Manual

10A/10A-D Manual (1.1 EN)

Fig. 12: Isobar diagram horizontal10A-Dvertical setupFig. 13: Isobar diagram verticalFig. 14: Isobar diagram horizontal10A-Dhorizontal setup, hornrot

2.5. Technical specifications10A/10A-D system dataFrequency response (–5 dB standard) 60 Hz - 18 kHzFrequency response (–5 dB CUT mode) 100 Hz - 18 k

3.1. EU conformity of loudspeakers (CE symbol)This declaration applies to:d&b 10A loudspeaker, Z1555d&b 10A-D loudspeaker, Z1556manufactured

D2610.EN .01, 01/2011 © d&b audiotechnik GmbHwww.dbaudio.com

SymbolsontheproductPleaserefertotheinformationinthemanual.WARNING!Dangerousvoltage!General information10A/10A-D ManualVersion: 1.1 EN, 01/2011, D2610.

1. Safety precautions... 41.1. Information regarding the use of loudspeakers... 42. 10A/

1.1. Information regarding the use of loudspeakersPotential risk of personal injuryNever stand in the immediate vicinity of loudspeakers driven at ah

2.1. Product descriptionThe 10S, 10A and 10AL and their "D versions" are a family of highperformance 2-way loudspeakers employing a single

2.2. ConnectionsThe cabinets are fitted with a pair of NL4 connectors and a twopole screw terminal block (ST). All four pins of both NL4connectors ar

NL4 connection with cover plateThe two NL4 connector sockets of the cabinet's connector panelare located in a recess to allow the use of the cov

HFA circuitIn HFA mode (High Frequency Attenuation), the HF response of thesystem is rolled off. HFA provides a natural, balanced frequencyresponse w

2.4. Dispersion characteristicsThe following graphs show dispersion angle over frequency of asingle cabinet plotted using lines of equal sound pressu