Db MAX2 User Manual download pdf (Page 5)

2.1. Product description

MAX2 is a 2-way stage monitor employing a 15"/1.4" coaxial

driver combination with a passive crossover. The driver design

allows the use of a compact, low height cabinet.

Coaxially mounting the 1.4" HF compression driver and the 15" LF

driver using a single magnet assembly creates a very compact

driver with 75° constant directivity HF dispersion.

With a frequency response extending from 55 Hz to 20 kHz, the

MAX2 can be used individually as a full range system, or it can be

supplemented by different d&b subwoofer systems such as the Y-

SUB, V-SUB or B6-SUB.

The cabinet is constructed from marine plywood and has an impact

resistant paint finish. The front of the loudspeaker cabinet is

protected by a rigid metal grill in front of an acoustically

transparent foam. Each side panel incorporates a handle while

four M10 threaded inserts allow connection to different rigging

devices and brackets. A pole mount is incorporated in one side

panel to accept a loudspeaker stand. Two runners recessed in the

bottom panel prevent cabinet movement and protect the bottom

panel against scratching.

2.2. Connections

The cabinet is fitted with NLT4 F/M connectors. All four pins of

both connectors are wired in parallel. The cabinet uses the pin

assignments 1+/1–. Pins 2+/2– are designated to active

subwoofers. Using the male connector as the input, the female

connector allows for direct connection to a second cabinet.

The cabinet can be supplied with NL4 or EP5 connectors as an

option.

Pin equivalents of the connector options are listed in the table

below.

NLT4 F/M

NL4

1+ 1– 2+ 2– n.a.

EP5 1 2 3 4 5

Connector wiring

2. MAX2 loudspeaker

d&b MAX2 Manual 1.1 en 5

1 2 3 4 5 6 7 8 9 10

No comments

Db MAX2 User Manual Page 5