Db D6 Software User Manual download pdf (Page 18)

Link A B off

Link A»B

D6 Stage right

-3.0dB

CUT

HFA

0.01

CSA

Q-SUB

+0.0dB

100

Fig. 9: Link A»B indication on the Main

screen

The EQ and/or Delay settings of both channels can be linked using the

"Link A»B" function. These functions are then controlled in the Channel

A menu, in the Channel B menu the linked functions cannot be edited.

On the "Main screen" the "Link A»B" function is indicated by altering

the center line to arrows as shown in the graphic opposite.

Selecting "Link A»B" and pushing the encoder allows the setting of the

following modes:

off Both controller channels are operated independently.

EQ The EQ function of controller Channel B is linked to

controller Channel A.

Delay The Delay function of controller Channel B is linked to

controller Channel A.

EQ+Delay Both the EQ and Delay function of controller Channel

B are linked to controller Channel A.

AmpPreset 1

AmpPreset

D6 amplifiers provide AmpPresets which contain all important user

settings of the entire device such as input, output and channel

configurations, EQ and delay settings.

Using the AmpPresets a sound system can be operated in different

configurations (e.g. "Conference", "Music" or "Emergency Call") without

the need of transmitting all detailed settings of the devices used.

There are three types of AmpPreset memories:

User

Nine Presets which can be accessed locally or via the d&b Remote

network (R10 Service software from V1.0.6). These Presets are used to

set the complete D6 to a previously defined configuration for a

particular application and can be named individually.

Alarm

Three Presets which can only be accessed via the d&b Remote network

(R10 Service software from V1.0.6). Intended for use in alarm systems

to protect the system settings against local modifications.

Backup

Three Presets which can only be accessed the d&b Remote network (R10

Service software from V1.0.6). Intended for temporary use to back up

the current system settings when another Preset is loaded.

The AmpPreset menu item indicates the last Preset number loaded and

is marked by a "

" if any setting has been modified since loading. The

menu below provides the functions Select, Recall, Store, Clear and a

name field to manage the Presets.

D6 Software manual (Firmware V1.x.x) (1.3 EN) Page 18 of 32

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Comments to this Manuals

No comments

Db D6 Software User Manual Page 18

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Db D6 Software